Thank you for providing that helpful information. With that axle spacing the MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K # MR27ZR is definitely the best choice. Regarding the Road Armor # LC696740, I would only recommend this kit if you had shorter equalizers. You likely wouldn't notice a difference between the two, and this would not be the best fit at 6" long center to center.
The MORryde is specifically designed for your axle spacing... view full answer...
Happy new year to you as well!
The best way to replace (or add new) safety chain loops to your trailer frame is to simply have new ones like the Brophy # MB38 welded on. There's really not another good method for doing this that will ensure safe operation in the event of a breakaway situation.
You can then add some Quick Links like # C82932 (if you don't already have them) to the loops that will hook up to your safety chains.
I have attached a short video review on the Safety Chain... view full answer...
The Kenda Karrier ST225/75R15 Radial Trailer Tire # AM10303 is made overseas in China.
This particular unit features a load capacity of 2,830 pounds at 80 psi and an excellent speed rating of 81 mph. I have attached a short video review on this tire below that you can check out as well. view full answer...
The highest weight rated trailer wheel and tire is the Taskmaster Provider ST235/80R16 part # TTWTRTM2358016E which has a weight capacity of 3,520 lbs at 80 psi. This would give you a wheel and tire capacity of 14.080 lbs which is over the 12k you mentioned. These do not come mounted on the wheel, so you would need # AM20741 for the wheel and then could get them mounted at a local shop. These are not USA-made tires, but they are made to USA specifications. We no longer have any USA made... view full answer...
Based on information we have from another with a 2021 Grand Design Reflection 315RLTS it has leaf springs measuring 25-1/4" from eye to eye. You can upgrade from the 5,200lb springs to the 6,000LB Leaf Spring # e34SR. This will require you to change out all 4 leaf springs. view full answer...
I have a solution for you. I suggest going with the Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs # 8327826 and the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3-1/2" Axles # RM-2470-2580. These will work with the Dexter axle.
You could do this however, it might not be a good idea. Increasing the capacity of your trailer's suspension will not increase the trailer's capacity. The frame and other parts may be rated lower than 6000... view full answer...
I checked with Lippert and for your electrical stabilizer jacks # LC298707 the only maintenance you need to perform is to keep the setup clean if you ever travel in harsh conditions like if there's salt on the road. Here's what they state:
It is recommended that when operating in harsh environments (road salt, ice buildup, etc.) the moving parts
be kept clean. They can be washed with mild soap and water. No grease or lubrication is necessary and in
some situations may be detrimental to... view full answer...
Yes, the mounting bracket for the Furrion Vision 2 Wireless RV Backup Camera System is the same as the Furrion Vision S Wireless RV Backup Camera System so you can replace one with the other without wiring in a new bracket. The correct model that comes with a 5" monitor is part # FOS05TASF. In order to add additional cameras (up to three) you can use part # FCN48TASF or part # FCE48TASL.
There won't be any issues with using the above on your 2019 model year. view full answer...
If you figure your dry weight on your 30 ft Grand Design has a 581 lb tongue weight. It is close to the lowest weight rating of the current bar you have. You only have a 219 lb gap before you are at the max for that bar. If your family is anything like mine bringing 200 lbs of stuff on a camping trip in nothing. I suggest getting the 800-1200 lb bars to be safe. If you are questioning it now you will always think about it if you don't. And most storage basements on travel trailers are... view full answer...
There are two different versions of the Furrion Vision S Wireless RV Backup Camera System; part # FOS43TASF for 4.3" or part # FOS05TASF for 5". The 5" system will allow you to add up to three additional cameras down the line if needed so if that is your plan either of these are what I recommend. They will all however be plug-in-play for a Grand Design Reflection. view full answer...
I'm sorry but the Furrion systems and the Hopkins systems are not compatible with each other. The most cost effective solution I have is the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS43TASF if you want to use that particular base.
You do have the option of not using the Furrion base and the power from the marker lights instead and still be able to use the Hopkins VueSMART RV and Trailer Backup Camera part # HM34FR and view it through your smart phone. view full answer...
Go To Results